kit LC83 Indoor/Outdoor Imp (Laser Cut)
Laser Cut Aircraft Kits

Indoor/Outdoor Imp (Laser Cut)


FREE Shipping on orders over $150! *

The Indoor/Outdoor Imp is a rise-off-the-ground (ROG) flying model perfect for indoor competitive flying. Indoor flight times have been recorded at over 90 seconds. If you are looking for a plane that is easy to build with a beginner or a group project to build and fly in 2 hours, this is it.

This free flight rubber powered kit contains a full-size rolled plan, laser cut balsa parts and hand-picked balsa stripwood, rubber motor, E-B propeller, EBM thrust bearing, landing gear wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
Note: Sometimes all it takes to get kids started building an airplane are some cool decorations for their plane. Ask us to include some of our "seconds" free markings when buying a kit to build with a child.

Indoor/Outdoor Imp (LASER CUT)

15" wingspan
Class: Sport flyer
Building Skill / Flying Skill: Easy / Easy
kit #LC83 price: $17.95

Watch the step by step build of the Imp in this 3 part video series by Zachary Crawford.

Building Set for Rubber Power

Building Set for Rubber Power

Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.

item B329 Price: $79.95
Building Set

Building Set

Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.

item B332 Price: $66.95
Advanced Tool Set

Advanced Tool Set

Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!

item B330 Price: $45.99
Flight Pack for Rubber Power

Flight Pack for Rubber Power

Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!

item B331 Price: $34.95
Customer photos: Submit a photo of your model!

Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut)

Last seen over the mountains of Tucson, AZ, 4 minutes and counting ...

Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut) Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut) Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut) Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut)
Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut)

New to model building, A.F. proudly holds his ready to fly Imp.

Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut) Easy Built Models - LC83 Indoor/Outdoor Imp (Laser Cut)
See Dave Hable fly his Aeronca Chief, Stinson Voyager, Taylorcraft, and Imp.

 

11/28/22 03:56 PM (EST)