/ Model Kits / Free Flight
Rubber Powered Airplane Kits / FF-75
Stuka Dive Bomber|
This kit is a 1/18 scale, flying model that uses the Box
and Former method of construction. Pre-1942 design, eligible
for Society of Antique Modelers (SAM) contests.
The Stuka was Germany’s most famous dive bomber of WWII, recognizable
by its inverted gull-wings and fixed undercarriage. Stuka innovations
included an automatic pull-up system to ensure that the plane recovered
from its attack dive even if the pilot blacked out, and wind-powered
sirens on the wheel covers that wailed during dives to scare its
This free flight rubber powered kit contains a
full-size rolled plan, building and flying instructions, hand
sorted printed balsa and balsa strip wood, rubber
motor, 10" E-B propeller, EBM thrust bearing, vacuum-molded canopy,
wheels, wire, TissueCal™ markings, and Easy
Built Lite tissue in olive and light sky blue. You will need
board, hobby knife, fine
sandpaper, and glue.
FF-75 Stuka Dive Bomber
Class: Scale flyer
Building Skill / Flying Skill: Experienced / Experienced
Price: $ 24.95
Extra vacuum-molded canopy.
Extra TissueCal™ markings. Price: $3.95/sheet
photo of your model!
This is an electric r/c conversion built by Shouzou Nakamura. The
specifications are: Motor - Brushless C T2211-1700; Propeller
Amplifier TP12; Servo - SG50×2(Elevator, Rudder); Receiver
- Bluearrow R3P5-H/T40MHZ 5ch; Battery Lipo Dualsky 7.4V450mA;
Balsa Model Airplane Kit, Balsa flies better.