kit FF30LC Baby Commercial (Laser Cut)
Laser Cut Aircraft Kits

Baby Commercial (Laser Cut)




The Baby Commercial is a sport model that flies great and is easy to build. This airplane is a high wing endurance model that gives the competition a run for its money with outdoor flights over 4 minutes. Its pre-1942 design is eligible for Society of Antique Modelers (SAM) contests.

This free flight rubber powered kit contains a full-size rolled plan, building and flying instructions, laser cut balsa parts, hand-picked balsa strip wood, rubber motor, E-B propeller, EBM thrust bearing, wheels, landing gear wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.

Baby Commercial (LASER CUT)

24" wingspan
Class: Sport flyer
Building Skill / Flying Skill: Easy / Easy
kit #FF30LC price: $23.95
Building Set for Rubber Power

Building Set for Rubber Power

Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.

item B329 Price: $78.15
Building Set

Building Set

Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.

item B332 Price: $64.95
Advanced Tool Set

Advanced Tool Set

Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.

item B330 Price: $43.08
Flight Pack for Rubber Power

Flight Pack for Rubber Power

Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.

item B331 Price: $29.06
Customer photos: Submit a photo of your model!

kit FF30LC Baby Commercial (Laser Cut) kit FF30LC Baby Commercial (Laser Cut)
kit FF30LC Baby Commercial (Laser Cut) kit FF30LC Baby Commercial (Laser Cut)

"This plane flies extremely well, the model balanced slightly tail heavy and required a number 4 nut as nose weight. The plane is very sensitive to thrust line and requires slight side thrust and a few degrees of down thrust. With proper trim the model climbs in fairly tight circular flight pattern." - Dave Hawley

kit FF30LC Baby Commercial (Laser Cut)
kit FF30LC Baby Commercial (Laser Cut) kit FF30LC Baby Commercial (Laser Cut) kit FF30LC Baby Commercial (Laser Cut) kit FF30LC Baby Commercial (Laser Cut)

 

09/19/17 09:27 PM (EDT)