.jpg)
Laser Cut Aircraft Kits
Korda Victory (Laser Cut)
| FREE Shipping on orders over $150! * |
This kit is Dick Korda's 1939 design redrawn in CAD by David Niedzielski for reissue. Modifications were limited to using a rear motor peg and the nose block. This model is eligible for Flying Aces Club and Society of Antique Modelers (SAM) events.
This free flight rubber powered kit contains a full-size rolled CAD drawn plan, LASER CUT balsa parts and balsa stripwood, FAI SuperSport rubber motor, 10" E-B propeller, EBM thrust bearing, wire, wheels, clear plastic, Easy Built Lite tissue in yellow and black, and TissueCal™ markings. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
Korda Victory (LASER CUT)
32" wingspanClass: Sport flyer
Building Skill / Flying Skill: Easy / Easy
kit #LC97 price: $47.95
Extra TissueCal™ markings.
item #B94 price: $4.95
Building Set for Rubber Power
Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B329 Price: $79.95
Building Set
Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B332 Price: $66.95
Advanced Tool Set
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!
item B330 Price: $45.99
Flight Pack for Rubber Power
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!
item B331 Price: $34.95
"... my long time favorite, the Korda Victory." - Grant Carson
Korda Victory construction photos from David Camp.
"Hello, After a 16 year absence (marriage/kids) I decided to try Free Flight again. I purchased your Victory kit and had a blast building it. Attached are a couple of photos. Hope to test fly this weekend. I plan on getting the Ritz kit next. I have a soft spot for the Old Timer kits. Thanks for putting out some great kits!" John Pate
Al Yunker shows us 1 method for making a removable wing using dowels and rubber bands. For another method read Dave's article on using magnets to make a removable wing.
"Here are some photos of one of your Korda Victory kits. Two years ago I built one of your Miss Canada Seniors and had good luck with it. As a newcomer to rubber powered model building, this was the first plane I built that flew well. Since I had such good results, I decided to build the Korda Victory, which I decided to cover in red and white using Easy Built tissue sprayed with Krylon, which I will try again, since the model weighs in lighter than it would with brushed-on dope. Since I fly only for fun, I omitted the landing gear which doesn’t fare well in the rough terrain my models have to land on." - Tom O'Neal
