kit LC88 Jimmie Allen Blue Flash Racer (Laser Cut)
Laser Cut Aircraft Kits

Blue Flash Racer (Laser Cut)


FREE Shipping on orders over $150! *

This kit is eligible for Jimmie Allen, Society of Antique Modelers (SAM), and Flying Aces Club events. Additionally, the plane features a removable 24" wing.

This free flight rubber powered kit contains a redrawn and updated full-size rolled plan, laser cut balsa parts and hand-picked balsa strip wood, E-B propeller, EBM thrust bearing, FAI rubber motor, clear plastic, laser cut balsa wheel blanks, Easy Built Lite tissue, and one pair of Jimmie Allen TissueCal" markings. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.

Blue Flash Racer (LASER CUT)

24" wingspan
Class: Sport Endurance flyer
Building Skill / Flying Skill: Experienced / Easy
kit #LC88 price: $41.95
Jimmie Allen TissueCal Markings
Additional TissueCal™ markings.

Includes 4 different pairs of Jimmie Allen markings printed on white Easy Built Lite tissue.

item #B100 price: $7.95/sheet

A Story About Jimmy Allen Models

See our other Jimmie Allen kits.
FF12LC Jimmie Allen Skokie
FF-68 Jimmie Allen MC B-A Parasol
CA-03LC Jimmie Allen Special (Laser Cut)
Building Set for Rubber Power

Building Set for Rubber Power

Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.

item B329 Price: $79.95
Building Set

Building Set

Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.

item B332 Price: $66.95
Advanced Tool Set

Advanced Tool Set

Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!

item B330 Price: $45.99
Flight Pack for Rubber Power

Flight Pack for Rubber Power

Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!

item B331 Price: $34.95
Customer photos: Submit a photo of your model!

kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)

"Have attached some pics of my Blue Flash. Used basswood for the longerons. Gizmo Geezer prop. Wing DT. Came in at 40 grams. Still trimming, haven't put in full winds yet, but looks quite majestic in the air." - James N. Martin

kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)

"This kit got a bad revue in a model magazine. I thought I would build it to see why. The writer in my opinion just did not know what he was talking about. As usual no real issues though not easy to build. Biggest challenge was the cabane struts but I did finally get them right! Nice kit, used your scheme and tissue. Light weight, should fly fine! " - John Majane

kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)

"I have just completed 2 of your laser cut kits, a Jimmie Allen Blue Flash and Half a Wake. They came out really well, spending about a week of spare time on each model (total 2 weeks). Modifications were minimal, mainly substitution of Czech props (9.5" for Blue Flash, 7.875" for Half a Wake.) Laser cutting was excellent with everything fitting together just fine; I now await some spring trimming weather!" - Ted Allebone

kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Jimmie Allen Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut)
kit LC88 Blue Flash Racer (Laser Cut) kit LC88 Blue Flash Racer (Laser Cut)

 

11/28/22 03:56 PM (EST)