FREE Shipping on orders over $150! * |
Designed for leisurely country flying, the Champion was a pleasant tandem 2-seater aircraft. Easy to fly and available at low cost, it was one of the "puddle-jumpers" that emerged during the post WWII aviation boom.
This free flight rubber powered kit contains a full-size rolled plan, laser cut balsa parts and hand-picked balsa strip wood, vacuum-molded cowl, rubber motor, 10" E-B propeller, EBM thrust bearing, wheels, Easy Built Lite yellow tissue, and LaserCal™ markings. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
Registration markings for the wing and tail plus an accent strip for the fuselage, all precut with our laser from red tissue.
item #B84 price: $8.95Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B329 Price: $79.95Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B332 Price: $66.95Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!
item B330 Price: $45.99Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!
item B331 Price: $34.95"Just completed your Aeronca Champion kit LC-04. Great wood and clean laser cutting. An easy build, and a great looking model when finished. Will be entering it in Golden Age Civil class at our upcoming Flying Aces contest Nov 13 in San Diego. Thanks for keeping stick and tissue alive." - Mark Chomyn
Electric R/C conversion.